Well, if your faucet is elderly, try installing a new one. Either problem requires a plumber. If the water is slow throughout the house, the fixes are a little different. First double check the main water valves, the ones by the meter. Gently twist the handles back and forth and it may dislodge any debris. Next, if your home has one, have a plumber check the pressure regulator.
This bell-shaped device can deteriorate over time and cause a sudden drop or spike in pressure. Search Products. Kitchen Sinks Browse All. Visit Our Blog. Your Home. Your Style. Browse Trending Styles. Bathroom Sinks Browse All. Identifying the cause of a slow water stream in your faucet is the first step toward making the necessary repairs to fix it. Many bathroom faucets come with low-flow aerators. An aerator is threaded onto the end of the faucet spout.
Low-flow aerators are designed to save on water consumption by limiting the flow of water through the spout. The water saver is a small disc located inside of the aerator and should not be removed. If such an aerator is the cause of the problem, replace it with another type. Mineral deposits and sand particles can plug the mesh filter screen of the faucet aerator, slowing the stream of water. If the reading has increased, you probably have a leak and should call a plumber.
If you notice that the cold water pressure is fine but the hot water pressure is low, then the issue may be with your water heater. Check the valves on the water heater to ensure they're open all the way and see if that improves your hot water flow.
If not, the issue may be more intensive - the water lines leading into the water heater may have leaks or blockages or the water heater itself might be going. In that case, you should hire a professional. Hopefully, you were able to resolve your slow water flow issue. But if the problem persists, or if you're uncomfortable tinkering with the plumbing on your own for fear of creating a much larger issue a legitimate concern , then you shouldn't hesitate to seek the opinion of a professional.
Looking for a Pro? Call us at Shut Off Valves As simple as this may sound, sometimes slow water flow can be attributed directly to a shut off valve that isn't completely open. It also acts as a filter at the end of the faucet; collecting dirt and debris that may be flowing through the pipes to your bathroom sink. It is, of course, the filter function that can ultimately cause problems regarding water pressure.
As the filter becomes plugged with debris, the amount of water that can flow through is decreased. This is noticed by a reduction in water pressure and a less than desirable amount of water flowing from the faucet.
Remove the aerator from the end of the faucet by unscrewing it. You should be able to do this by hand but may need a small wrench if it is screwed on tightly. Clean the wire mesh by rinsing it under the water and brushing with a scrub brush or old toothbrush.
This should remove any visible debris and may be enough to improve the water pressure enough. If not, then it may be mineral deposits that are the culprit. Soaking the aerator in vinegar overnight will dissolve any mineral deposits and leave the wire mesh aerator free of any plugging that is causing the issue. Replace the aerator.
Luckily these are readily available and are inexpensive; you may even want to keep a small stock of them on hand if you live in an area with hard water as the aerator may be prone to clogging with mineral deposits from the water. A more systemic, but easily solved, reason might be that the water shut off valves located below the sink are not completely open. Perhaps they were not opened properly after closing them to do some regular maintenance, or for winter shut down.
If your under-the-bathroom-sink looks anything like mine, then perhaps an errant shampoo bottle or toothpaste stock knocked into the valve taps and partially closed the valve. Either way the fix is super simple. Ensure the water supply valves are fully open.
0コメント